Shanghai Ring Sony Nex-3 Nex-5 İçin Lcd Viewfinder V4

Sony NEX-3, NEX-5 için

LCD Viewfinder V4

Sony NEX-3, NEX-5 İçin LCD VİEWFİNDER V4

Features:

Specially designed for Sony NEX, easy to insta ll, robust and durable

Allow the use of LCD in bright outdoor daylight

180°viewing angle, suitable for right or left eye users

Magnetic bracket allows easy installation and removal without any damage

Designed for LCD screen viewing of digital camera,can observe the details well

Spontaneously transform your video enabled DSLR into a handheld video camera.

Can be used by still photographers who either want to block out light while shooting in Live View mode or to

inspect pictures on the LCD display.

Comes with a metal frame. While you apply the interface frame, set your camera to display a bright full screen image,such camera menu in it's brightest state etc to a id the correct and even placement of the interface frame.

The LCD viewfinder uses four small magnets connecting with a metal frame that  using unique adhesive

connects it to the camera. The power of these magnets is strong enough to hold the loupe against the frame and camera

Specification:

Fit Model: Sony NEX-3, NEX-5

Material: Plastic, Rubber, Glass, Metal

Magnification: 2.8x

Aperture Diameter: 40mm

Eyecup: Silicone Rubber

Support LCD: 3" (3:2)

Color: Black

Weight: 85g

Application guide:

1.Leave your camera recording for approximately 12 minutes before and just after the frame is  applied ? as

the camera gets moderately warm during the recording it helps to develop a strong initial  bond between

the metal interface and your camera body.

2.But while you apply the interface frame set your camera to display a bright full screen image such camera

menu in its brightest state it a id  the correct and even placement of the interface frame.

3.Now, remove the paper backing and carefully apply the frame onto the camera body while ensuring an even

placement around the LCD.

4.Apply pressure (message it with your fingers) to ensure better bond between the frame and camera.

5.Leave a weight onto the freshly applied frame at least for 15 minutes while your camera is recording

as the heat generated will ensure a better first specially if you are in a hurry.

6.Initial bond strength of approximately 76% is achieved after 15 minutes.

Package inclduded:

1 x V4 LCD viewfinder

1 x Magnetic LCD Screen Mount

UYUMLU MAKİNELER

SONY

NEX 3 / NEX 3C

NEX 5 / 5C / 5R / 5N / 5X